DTF - You Are Enough
These are in stock and ready to ship.
Transfers are 10" at the longest side.
* Images are of actual transfers.
If you have a requests, the MOQ is 10 and it takes around a week for me to receive them.
No iron can be used, only a heat press.
Heat press temperature should be set to 325 F.
Prior to heat pressing, hover the heat press over the transfer INK SIDE UP as close as you can without touching the transfer and allow the transfer to warm up for 30-60 seconds and this process will remove moisture from the transfer. This moisture in the ink builds up during the mailing process.
Heat up your garment as well.
DO NOT USE A COVER SHEET!
Use Medium to Heavy Pressure to press the transfer on the shirt for 15 seconds, wave the shirt a few times to cool it down, or use a cooling jig. Don't peel straight after pressing.
Repress if you would like to do a second press. However, There is no need to use a cover sheet after you’ve peeled the transfer, press again for 5-10 seconds.
If printing small print or small text, Press for 25 seconds using heavy pressure and let the transfer cool completely before peeling. If for any reason that the print begins to lift off the shirt, stop peeling and press again. This could be due to inconsistent pressure or heat spots.